rjpetrochem > Products

Furnace oil [FO 180 CST]

Furnace oil is a dark viscous residual product used as a fuel in different types of combustion equipment. Presently grade (kinematic viscosity range of 125 to 200 CSt at 50°C) conforming to this specification is being marketed. Broadly its applications can be classified as:

Steam Raising
In the process industry and thermal power stations.

Industrial Furnaces
Metallurgical furnaces, pottery and brick kilns, glass furnaces etc.

Special Applications
Rotary lime Kiln in paper industries / Cement Industries
For drying tea leaves
As a feed stock for fertiliser manufacturing

Bitumen

RJ Petrochem Pvt. Ltd. is profited by its valuable experiences and technical knowledge in bitumen exportation field and enjoying petroleum products experts could have exported different kinds of bitumen either in bulk or in drum in grades of 60/70 and 85/100.

Bitumen Grades
We offer a large variety of different grades of bitumen. This variety includes the following bitumen, all of which are according to the analysis of oil inspection companies. Grades of bitumen packed in new steel drums for All grades.

– General Grades
Bitumen 85/100, 60/70

– Special Grades:
Bitumen 30/40, 50/70, 85/25, 100/120, 90/15, MC250.

Low Aromatic white spirit

White spirit is a refined petroleum solvent of moderate volatility. It is composed of about 20% aromatic content, which ensures good solvency for this type of product.

The specification of white spirit is shown below:

These products are clear and colourless solvent with very low water solubility and a characteristics odour (odour threshold 0.5-5 mg/m3). The boiling range of this group of solvents falls within the limits 150-2000C. These solvents can be classified into low-aromatic grades (approximately 15-20% and high aromatic hydrocarbons. They generally consist of hydrocarbon in the C9 to C14 range, again including normal and branched paraffin as well as naphthenic (cycloparaffins) and aromatic compounds. Olefins are present in trace amounts only. Stoddard solvents, mineral spirits, low aromatic white spirits (LAWS) and turpentine substitute are well known examples from this range.

These products are mainly used as: solvents and thinners for lacquers, paints, resins and printing-ink; solvents in formulations of chemical products e.g. pesticides and metal degreasing wool degreasing and dry cleaning.

Details of the solvents used in paints are not available, but these solvents are common component of the solvent in wide variety of paints. It is also used by both amateur and professional painters as a diluents. The proportion of the total solvent represented by Aromatic oil varies between paints. Estimates of Aromatic oil as a percentage of total paint solvents are approximately 25%.

Lubricant Oil

Our manufacturing facility in the UAE houses a cutting-edge laboratory equipped with the most advanced testing and measuring equipment to help us create the best quality products in the market today. Our research and development team comprises some of the best and brightest minds the field of engineering solutions. As chain oil suppliers, we understand the importance of finding new and better ways to overcome general operational adversities.

As we advance to the forefront as one of the premiere lubricant companies in the country, you can count on us to continue to further our development efforts to create new products that slow the wear and tear that tools and machinery suffer from regular use. For the food manufacturing industry, we have a complete range of Donaldson filters in order to ensure that industry and regional standards established for hygiene and quality are met and exceeded at your facility.

Coal

RJ Petrochem Pvt. Ltd. specializes in the promotion of coal trading and liquidity all over the world. We develop and maintain procedures which are the best internationally for coal trading. We develop policies, exchange information among members of the industry and strive to continually keep increasing knowledge, skills and practice tools used for trading of coal to keep up the badge of being one of the best coal export companies.

Low Sulphur Fuel Oil

We (RJ Petrochem Pvt. Ltd.) are one of the largest suppliers of Furnace Oil and well-established traders of various petroleum products. RJ Petrochem Pvt. Ltd. is dedicated to make each client as successful as it can be.

We are one of the well-established traders of petroleum products like Fuel oil (CST 180, 280 380), Low Sulphur Fuel Oil, Base Oil, Bitumen etc. in UAE and we also source from reliable and qualitative suppliers.

As you already know that the trending market is marching towards a hassle free, non-polluted and a safe environment, Low Sulphur Fuel Oil plays a better role among the fuel products and creeps over furnace oil among the industries. As per today’s market condition, the availability of LSFO is with 1.5 to 2% Sulphur content whereas RJ Petrochem Pvt. Ltd. feels proud to supply the same with below 0.1% Sulphur (approx.. 0.09%). If you are interested in purchasing it, I can give the samples for you to confirm.

CAPACITY:

We can supply 15,000MT per month regularly and could be done either via bulk (ship load) or in containers. Kindly let me know your interest on this ASAP, for me to hold the product for you.

I’m happy to answer any questions you may have about our firm.

We are looking forward for your favourable consideration on this matter. Should you have any questions and/or concerns, please feel free to contact us @ +91 9600051534/+91 82203 91999.

Laboratory Report

The above sample (s) was/were analysed as detailed below and the following results obtained:

Test Method Unit Result
*Ash Content ASTMD482-13 %m 0.021
Carbon Residue,Conradson ASTM D189-14 %m 4.84
*Flash Point ASTM D93-13,Proc.B 72
*Density @ 15℃ ASTM D4052-11 Kg/l 0.9094
Calorific Value (Gross) ASTM D4868-00 BTU/lb 19162
Calorific Value (Nett) ASTM D4868-00 BTU/lb 18035
*Sulphur Content ASTM D4294-10 %m 0.096
*Viscosity, Kinematic @ 50℃ ASTM D445-14 mm2/s 111.6
*Water content ASTM D95-13 %V/V 0.05
Total Sediment Potential IP 390 A-94 %m/m 0.03
Aluminum + Silicon IP 470 mg/kg <5
Sodium IP 470 mg/kg 5
Zinc IP 470 mg/kg 1
Calcium IP 470 mg/kg 52
Phosphorus IP 470 mg/kg 6

Petrol Engine Oils

RJ Petrochem Pvt. Ltd. has a high performance multigrade gasoline engine oil formulated from premium quality synthetic and mineral base oils and selected additives. It is recommended for all modern gasoline engines and provide excellent protection from combustion deposits, heat induced oil oxidation and sludge deposits.

Diesel Engine Oils

This is premium quality robust performance diesel engine oil with high alkaline reserve, developed to meet the most severe performance requirements of naturally aspirated or turbocharger diesel engines operating on high sulphur distillate fuels. Recommended for a wide range of use in high specific-output, four-cycle diesel engines to provide maximum protection.

Synthetic / Semi Synthetic Oils

A high performance synthetic multi grade gasoline engine oil formulated from premium quality synthetic base oils and selected additives. It is recommended for all modern gasoline engines and provide excellent protection from combustion deposits, heat induced oil oxidation and sludge deposits. It can be used for petrol engines with normal four stroke valve and turbo type with or without catalysts.

Hydraulic Oils

A top quality oil with high degree of wear protection designed with highly refined base stocks and well balanced additive package. Recommended for high pressure hydraulic systems used in all mobile and stationary equipments operating under severe working conditions. Also used for circulation system, compressor pump, bearing and gear lubrication where recommended.

Automatic Transmission Fluids

A high quality transmission fluid with new concepts of friction modification formulated with highly refined base stocks and specially selected complete additive system. These oils are recommended for automatic and semi automatic transmissions used in passenger cars and commercial vehicles, operating under severe service conditions.

Greases

A high performance synthetic multi grade gasoline engine oil formulated from premium quality synthetic base oils and selected additives. It is recommended for all modern gasoline engines and provide excellent protection from combustion deposits, heat induced oil oxidation and sludge deposits. It can be used for petrol engines with normal four stroke valve and turbo type with or without catalysts.

Gear Oils

Good quality gear oil formulated with highly refined base stocks and antifoam additive package. Suitable for manual transmissions, spiral bevel and worm axles and all gearing systems used in automotive and off the road equipments operating under mild service conditions.

Industrial Gear Oils

High-performance gear oil for industrial gearbox applications, Industrial gearboxes are expected to perform under conditions of high heat and heavy loads; and in environments often contaminated with dirt, process debris and water. Without adequate protection, gears will wear prematurely. You’ll have to replace parts more frequently, change oil more frequently, and worst of all, you’ll experience equipment downtime.

Brake Fluids

RJ Petrochem Pvt. Ltd. has a supreme quality, long-life performance synthetic fluid with excellent viscosity temperature properties, designed with water soluble polyglycol.Brake fluid is a type of hydraulic fluid used in hydraulic brake and hydraulic clutch applications in automobiles, motorcycles, light trucks, and some bicycles. It is used to transfer force into pressure, and to amplify braking force.

Cutting Fluids

Cutting fluid is a type of coolant and lubricant designed specifically for metalworking processes, such as machining and stamping. There are various kinds of cutting fluids, which include oils, oil-water emulsions, pastes, gels, aerosols (mists), and air or other gases.

Coolant

A coolant is a substance, typically liquid or gas, that is used to reduce or regulate the temperature of a system. An ideal coolant has high thermal capacity, low viscosity, is low-cost, non-toxic, chemically inert, and neither causes nor promotes corrosion of the cooling system. Some applications also require the coolant to be an electrical insulator.

If You Need Any Support ... We Are Available For You

Contact Us